• Gossen Metrawatt
  • Camille Bauer

METRALINE PRO-TYP EM I

Vielen Dank für Ihr Interesse! Wir werden uns umgehend um Ihre Anfrage kümmern.

Datenschutz

Wir legen großen Wert auf den Datenschutz!
Lesen Sie hier mehr in unserer Datenschutzerklärung

Item number: Z525F

Test Adapter for Electric Charging Points (single/3-phase, type 2) for PROFITEST

Single and 3-phase test adapter with type 2 plug for testing the effectiveness of protective measures at electric charging points with the Profitest Master. Simulation of fictitiously connected electric vehicles and simulation of current-carrying capacity per IEC 61851-1. Extended CP test pin for testing charging points with permanently attached charging cable.
  • Test Adapter for Electric Charging Points (single/3-phase, type 2) for PROFITEST

  • Vehicle simulation (CP)
    Vehicle states A through E are selected with a rotary switch.
  • Cable simulation (PP)
    The various codings for charging cables with 13, 20, 32 and 63 A, as well as “no cable connected”, can be simulated with the help of a rotary switch.
  • Fault simulation
    Simulation of a short-circuit between CP and PE by means of a rotary switch
  • Indication of phase voltages via LEDs
    Depending on the charging station, either one or three phases can be active.
  • Testing of electric charging stations with permanently attached charging cable by means of an extended CP test pin

For vehicle simulation (CP): States A, B, C and E can be simulated in accordance with IEC 61851. The various vehicle states are selected by means of a rotary switch.

  • State A – no vehicle connected
  • State B – vehicle connected, but not ready for charging
  • State C – vehicle connected and ready for charging, venting of the charging area not required
  • State E – error: Short circuit between CP and PE via internal diode

Regarding cable simulation (PP): The various codings for charging cables with 13, 20, 32 and 63 A can be simulated. It’s also possible to simulate the “no cable” state.

The various charging cables are simulated by connecting different resistances between PP and PE with the help of a rotary switch. The following values are possible in accordance with IEC 61851:

  • No cable – 0 Ω
  • 13 A cable – 1.5 kΩ
  • 20 A cable – 680 Ω
  • 32 A cable – 220 Ω
  • 63 A cable – 100 Ω

Contact

Do you have any questions on the product or do you need technical information or details on the current delivery period? Our sales backoffice will be pleased to assist you.

We wish to spare you long waiting times on account of increased telephone traffic and therefore kindly ask you to send us a message. We assure you to get back to you as soon as possible. Thank you very much for your attention.

Sales International


Telephone:+49 911/8602-999

Send message

myGMC

Under myGMC you can register your product and receive up-to-date information on firmware updates, modifications of standards and many more topics.

Dialogue, Information and Actions: