Adapter Set for Photovoltaic Tester
Barcode Entry Tool (CODE 128)
Current Sensor Clamp, 1mA ..15A / ..150AAC, adjustable
Test adapter for electric charging stations (single/3-phase, type 2) for PROFITEST
Adapter Set for Photovoltaic Tester
Barcode Scanner with Laser for Test Instruments with RS 232 Port
Current Sensor Clamp 1/10/100/1000 AAC, selectable
Plastic System Case for Testers and Accessories
Installation board – “service line with main ground bus” – for fault simulation for testing the effectiveness of protective measures for measurements in accordance with IEC 60364.6 and EN 50110 (DIN VDE 0100-600, 0105-100)
Test adapter for electric charging stations (single-phase, type 1) for PROFITEST
Adapter Set for Photovoltaic Tester
Flexible Current Sensor 3/30/300 A, 1V-10mV/A, Loop length 450 mm
Foam insert for tester PROFITEST MASTER and accessories
Installation board – “sub-distribution branch with installation circuits” – for fault simulation for measurements per IEC 60364.6 and EN 50110 (DIN VDE 0100-600, 0105-100)
Sensor for Irradiation, Temperature and Inclination
Foam insert for tester PROFITEST INTRO and METRISO BASE, PRO, TECH, INTRO and accessories
Charger for Battery Pack - for PROFITEST, METRISO, SECULIFE IP
Magnetic Measuring Tips for Photovoltaic Testers - Set with Magnetic Holder
Aluminium Case for Testers and Accessories
Charger for Master Battery Pack - for PROFITEST MBASE, MTECH
Calibration Adapter for Insulation and Resistance Measuring Instruments
Aluminium Case for Testers and Accessories
Trolley for Cases
Variable Plug Adapter Set
Ever-ready Case for PROFITEST MASTER with Outside Pocket for Accessories
Universal Carrying Bag
Adapter for Testing Single-Phase Extension Cables (Coil Cable)
Universal Carrying Pouch Big
Adapter for Testing Single-Phase Extension Cables (Straight Cable)
Universal Carrying Pouch Big
Plug Inserts for Germany - SCHUKO System
Hard Case for 2 Testers C Series and Accessories
Plug Inserts for Germany - SCHUKO System, Angled
Hard Case for 1 Tester C Series and Accessories
Plug Inserts for according to SEV
Ever-ready Case for PhaseCop 2
Ever-ready Case for Testers
Plug Inserts for PROFiTEST - for PE Measurements and the like
Plug Inserts for PROFiTEST with 3 Connector Cables for Any Connection Standards
Adapter for Connecting 4 Wires for Earth Measurement
Clamp Adapter for Connecting a Clamp Meter to the Test Plug
Leakage Current Measuring Adapter for PROFITEST MXTRA
Flat Test Clip, CAT IV @ 1000 V, 32A for PROFITEST Master
Probes Set, CAT III @ 600 V, 1 A for PROFITEST Master
Magnetic Measuring Tips with Contact Protection - Set with Magnetic Holder
3-Phase Current Adapters for Test Instruments and 5-Pole CEE Outlets
3-Phase Current Adapters for Test Instruments and 5-Pole CEE Outlets
3-Phase Current Adapters for Test Instruments and 5-Pole CEE Outlets
Adapter for Testing 3-Phase Devices and Extension Cables in Combination with SECUTEST Series Safety Testers
Leakage Current Clamp Meter for SECUTEST PRO and SECULIFE ST
Brush Sensor for Testers
Adapter for Testing 3-Phase Devices in Combination with SECUTEST Series Safety Testers
Barcode Reader / Scanner with Laser for Test Instruments with USB Port
Multiple Probe Connector
Adapter for Testing 3-Phase Devices in Combination with SECUTEST Series Safety Testers
Label Printer Prints Barcode Labels for Identifying Devices and Systems
Plastic System Case for Testers and Accessories
Patient connector cables
16 A 3-Phase Current Adapter
Label Tape Cartridge Set for Z721D Barcode Printer
Plastic System Case for Testers and Accessories
Probe Cable (2m) for Protective Conductor Measurement
32 A 3-Phase Current Adapter
Label Tape Cartridges (18 mm) for Z721D Barcode Printer
for 2 adapters AT16DI or AT32DI or similar
Probe Cable (2m) for Protective Conductor Measurement
Adapter Cable from CEE16 to CEE32 Plugs
Thermal Printer for SECUTEST BASE(10), PRO, SECULIFE ST-Family (M7050 series only)
Ever-ready Case for SECUSTAR FM
Probe Cable (5m) for Protective Conductor Measurement
Adapter for Testing Protective Conductor and Insulation Resistance of Appliances and Extension Cables
Thermo Paper for Thermal Printer Z721S
Universal Carrying Bag
Adapter for 3-Phase Load Components in Combination with SECUTEST and METRATESTER Series Testers
RFID Reader / Writer (13.56 MHz) for Test Instruments with USB Port
Universal Carrying Pouch Big
Cable set for connecting testers to the mains
Adapter for Testing Single-Phase Extension Cables
RFID Reader / Writer (13.56 MHz) for Test Instruments with RS 232 Port
Universal Carrying Pouch Big
Test Probe with Pulse Current Generator
Test Adapter for Testing Open-Circuit Voltage at Welding Units per EN 60974
For Identifying Devices and Systems
For Identifying Devices and Systems
10 recording charts for printer module
For Identifying Devices and Systems
10 printer ribbon cartridges for printer module
Storage and Input Module for SECUTEST with RS232 and USB interface
Interface Converter
Calibrating Adapter for all SECUTEST and METRATESTER
Current Sensor Clamp, 1mA ..15A / ..150AAC, adjustable
2 each in plastic bag, diameter 4 mm, length 1.0 m, 1000 V CAT III, 19 A, blue
2 each in plastic bag, diameter 4 mm, length 1.0 m, 1000 V CAT III, 19 A, black/red
Set of Various Items used to warn Unauthorized Persons
Adapter for Protective Conductor and Insulation Tests
Signal Lamp Set
Emergency Stop Switch
Trolley for the Hard Case System of PROFITEST PRIME
Measuring Adapter for Temperature and Humidity
Leakage Current Clamp Meter
Adapter for Current Clamps for PROFITEST PRIME
SK4-L for L conductor (Length 4 m)
SK12-N for N conductor (Length 12 m)
SK4-N for N conductor (Length 4m)
SK12-L for L conductor (Length 12 m)
SK4-PE for PE conductor (Length 4 m)
SK12-PE for PE conductor (Length 12 m)
SK25-PE for PE conductor (Length 25 m)
Intelligent Measuring Probes with Remote Triggering for PROFITEST PRIME (Length 12 m)
High-voltage pistol
replacement test tips
HV package, PRIME AC
Probes Set, CAT III @ 600 V, 1 A for PROFITEST Master
Flat Test Clip, CAT IV @ 1000 V, 32A for PROFITEST Master
Test Probe with Remote Triggering for METRISO and PROFITEST Series
Earth Tester Set in Carrying Pouch with Space for the GEOHM C
Cable Set for Testers
Cable Set of Measuring Cables for Highohmic and normal Measurments
Guard Cable with 1 Alligator Clip
Extension Cable, 5 m
Alligator Clips, 2 ea.
Floor Probe
Charger with 4 NiMH Rechargeable Batteries for GEOHM 5
Current Clamp 1mA ..1200A, 1mA/A, 40 Hz - 5 kHz, 52mm Ø
Current Clamp Generator 0.2 ..1200A, 1mA/A, 40 Hz - 5 kHz, 52mm Ø
Interface Adapter for Test Instruments to a PC (IrDA-USB)
Calibration Adapter for Insulation and Resistance Measuring Instruments
Ever-ready Case for Testers
