Testing of safety measures in electrical systems is intended to protect people from accidents with electrical power, and thus to ensure their freedom from bodily harm. Property damage caused by electrical power should of course be prevented as well. And thus every electrical system should be checked with our test instruments before initial start-up, and at regular intervals thereafter, in order to assure the effectiveness of installed protective measures.
With the help of our innovative products, all relevant measured quantities can be acquired which are decisive for system safety.
PROFITEST MASTER Test Instrument Range for VDE 0100-600 / IEC 60364.6
Test instrument for testing the effectiveness of protective measures in electrical installations per DIN VDE 0100-600, machines and systems per VDE 0113-1, low-voltage switchgear and controlgear assemblies per VDE 0660-600-1, PV systems per VDE 0126-23 and electric charging stations per VDE 0122-1.
Measuring and test instrument for testing the effectiveness of protective measures at stationary electrical installations after completion, repair or expansion, and for periodic testing (DGUV regulation 3)
Test instrument for testing protective measures in electrical medical systems per IEC 60364-6 / DIN VDE 0100-600 / DIN VDE 0105-100
Loop resistance measuring instrument
Insulation measuring instrument
Installation board – “service line with main ground bus” – for fault simulation for testing the effectiveness of protective measures for measurements in accordance with IEC 60364.6 and EN 50110 (DIN VDE 0100-600, 0105-100)
Installation board – “sub-distribution branch with installation circuits” – for fault simulation for measurements per IEC 60364.6 and EN 50110 (DIN VDE 0100-600, 0105-100)
Test instrument for electric charging stations
Communication tester between the charging station and the electric vehicle
Adapter for standards-compliant testing of single and 3-phase, mode 2 and 3 charging cables with simulation of faults in accordance with DIN VDE 0701-0702 and the manufacturer’s specifications
Test adapter for electric charging stations (single-phase, type 1) for PROFITEST
Test adapter for electric charging stations (single/3-phase, type 2) for PROFITEST
Peak power measuring instrument and characteristic curve tracer for photovoltaic systems
Test instrument for PV modules and strings per DIN EN 62446 (VDE 0126-23)
The New Generation of Voltage Testers / Voltage Measuring Instruments
Phase Sequence Indicator
Phase Sequence Indicator
Voltage, Phase, and Continuity Tester plus Phase Sequence Indicator for up to 690 V AC/DC per DIN EN 61243-3:2011 / VDE 0682-401
Voltage and Continuity Tester
Installation board – “sub-distribution branch with installation circuits” – for fault simulation for measurements per IEC 60364.6 and EN 50110 (DIN VDE 0100-600, 0105-100)
Installation board – “service line with main ground bus” – for fault simulation for testing the effectiveness of protective measures for measurements in accordance with IEC 60364.6 and EN 50110 (DIN VDE 0100-600, 0105-100)
From now on we will be pleased to answer your calls on:
Monday to Thursday 8 a.m. to 4 p.m
Friday 8 a.m. to 2 p.m.
Do you have any questions on the product or do you need technical information or details on the current delivery period? Our sales backoffice will be pleased to assist you.
Sales International:
Telephone: +49 911 8602-0
Send message
Under myGMC you can register your product and receive up-to-date information on firmware updates, modifications of standards and many more topics.