• Gossen Metrawatt
  • Camille Bauer

LA102: How can I select the desired output power?

Only reduced output power is available at systems with 230 VAC.

  • SFP: If the “POWER_ON SBY” or “POWER_ON RCL” parameter setting has been selected, reduced PNOM is not cleared (i.e. PNOM is not increased) automatically after “POWER-ON”. For example, if an incorrect (lower) line voltage range has been detected due to a power disturbance, this can only be corrected with “POWER-ON” under “POWER_ON RST”.
  • Manual: [ESC/LOCAL] & [0] keys (= reset), and then “POWER-OFF” followed by “POWER-ON”.

Dialogue, Information and Actions: