There are three currently three subsidizing options:
Improve energy efficiency, decrease costs, reduce emissions and protect the environment as a result: these are compelling reasons for the introduction of an energy management system (EnMS) which makes it possible to identify unnecessary energy consumption, leaks, poor efficiency and utilization rates, as well as inadequate reactive current compensation. Due to peak and off-peak tariffs, the time of day at which energy is consumed also influences costs. Actual practice reveals that savings of 5 to 10% can be realized alone by means of responsible use of valuable resources or minimal investment. Committed companies significantly reduce their energy costs and thus increase their earnings and competitiveness by optimizing production and other processes. This also results in a valuable contribution to environmental protection.
Energy and environmental management systems have once again been eligible for subsidies since 2019. Up to 40% of the costs of an energy management system are subsidized by the German federal government, provided that it’s implemented within 24 months.
If the energy management software solution is integrated into a process/building control system, only the additional costs over and above those incurred for a control system without energy management functions are eligible for subsidization.
|Module||Percentage Subsidy of the Eligible Expenditure||Maximum Subsidy|
|1) Crossover technologies (replacement/procurement of high-efficiency equipment for industrial and commercial applications including fans, pumps or electric motors)||30 % (40 % for SMEs)||€200.000 per project|
|2) Process heat supply from renewable energy sources (measures for process heat supply including heat pumps, solar collectors and biomass plants)||45 % (55 % for SMEs)||€10 Mio. per project|
|3) I&C, sensor technology and energy management software||30 % (40 % for SMEs)||€10 Mio. per project|
|4) Energy-related optimization of systems and processes without any specification of certain technologies (conditions: availability of a savings concept and an amortization time of less than two years for the project without subsidization)||30 % (40 %for SMEs)||€500 (€700 for SMEs) per ton of reduced CO2 emissions per year|
GOSSEN METRAWATT provides you with support in preparing a measuring point concept and introducing and setting up an energy data logging system, as well as for the hardware required to this end and parameters configuration of the energy management software.
The EEG levy is used to finance ongoing further development of renewable energies. In principle, all electrical power consumers must pay the EEG levy, which is part of the price of electrical power. The German federal government wants to promote the international competitiveness of committed companies by offering an option for reducing the EEG levy.
Manufacturing companies whose electrical power costs account for at least 14% of gross value added (the so-called electricity cost intensity) can apply for a reduction or limitation of the EEG levy. The EEG levy is limited to 20% if electricity cost intensity is between 14 and 17%.
Furthermore, companies must consume at least one gigawatt hour (GWh) per year per location and are required to provide proof of certification in accordance with ISO 50001 if their consumption exceeds ten GWh in order to be eligible for the subsidy.
Already for quite some time now, energy-intensive manufacturing companies have been entitled to a refund for a portion of their electricity and energy taxes thanks to so-called peak consumption compensation. Proof of a company energy management system has been mandatory since the 1st of January, 2013. An energy audit in accordance with DIN EN 16247-1 is sufficient for small and medium-sized enterprises (SMEs). Peak consumption compensation is granted if the tax burden exceeds a basic allowance of €1000 per calendar year. The amount of the reduction depends on the difference between the electricity tax which exceeds the basic allowance and the (notional) reduction resulting from the fact that pension insurance contributions have fallen since the introduction of the electricity tax (for the general pension insurance scheme from 20.3% before the introduction of the electricity tax to currently 18.9%; with an employer contribution of 50%, this amounted to a reduction of 0.7% for employers in 2013 – the “differential amount”). No more than 90% of this difference is waived, refunded or recompensed. Based on this calculation formula, companies with high rates of electrical power consumption and few employees (for whom contributions to the public pension plan are required) benefit to an especially great extent from peak consumption compensation.
Do you have any questions on the product or do you need technical information or details on the current delivery period? Our sales backoffice will be pleased to assist you.
Sales Back Office
Telephone:+49 911 8602-111